TEXA Konfort Daimler

KONFORT 780R FOR R1234YF

The KONFORT 780R BI-GAS is the top of the range in the 700 Series, and the best recharge station on the market today.

Though it shares the same external dimensions as TEXA's other vehicle air conditioning diagnosis and recharge stations, it actually contains two separate refrigerant tanks and two distinct recovering, recycling and recharging circuits. The 780R BI-GAS can therefore work with R134a and R1234yf refrigerants at the same time.

The station is fully automatic and, once the type of refrigerant has been selected, can completes recharging operations with no further input from the operator.

The entire recharge procedure is completely automatic thanks to hermetically sealed oil tanks, a scale locking and release system and automatic refrigerant weighing.

The 780R diagnosis and recharge station even implements a special procedure to clean all its internal circuits during refrigerant recharging. The machine carries out the flushing procedure automatically in order to clean out the system when changing from one refrigerant to the other. This procedure takes approx. one minute.

The 780R BI-GAS represents a future-proof investment for all garages seeking a single recharge station for use with the old and the new refrigerant.

REFRIGERANT IDENTIFIER KIT

TEXA’s refrigerant identification system is based on NDIR (Non-Dispersive Infrared) technology and has been developed on the basis of a decade of experience in the production of exhaust gas analysis systems that are recognised as the best the market can offer in terms of accuracy and build quality. TEXA is the only European company and the second worldwide to develop and produce a refrigerant identification kit especially for air conditioning recharge stations.

TEXA has utilised the most accurate and compact technology, in order to develop the identifier and certain features have International patents (in addition to the 8 for the service stations). Development of the system took over a year. Particular attention was paid to the algorithms that identify refrigerant types R134a and R1234yf. The TEXA system not only identifies these two refrigerants but ensures their purity too.

The entire procedure takes around a minute, and the unit will alert the operator if the refrigerant is incorrect or contaminated, and will therefore lock the KONFORT service station preventing the recovery of contaminated refrigerant.

SPECIFIC SERIES SOLUTIONS

REFILLABLE HERMETICALLY SEALED OIL BOTTLES

Because standard bottles are not hermetically sealed, they always contain a percentage of air. The water molecules in the air bind with the oil and contaminate it. TEXA’s solution was to create special containers which prevent the oil from becoming contaminated by air and humidity. These have been patented. These special bottles can be re-used thanks to a special system which removes the air from the bottle.

HYDRAULIC SYSTEM FLUSHING

In order to guarantee safety and efficiency, it is important that each type of oil and refrigerant are not cross contaminated. TEXA have therefore developed a special automatic flushing function to clean the internal circuits of the service station.

AUTOMATIC BOTTLE IDENTIFICATION

With the introduction of new vehicles, new oils have been introduced for these applications. The correct oil type must be used relating to the air conditioning system to be serviced (e.g. PAG or POE). It is potentially damaging and dangerous to inject non-compatible oils into the system, so the operator must be sure to avoid mistakes. TEXA has developed an automatic oil bottle recognition system which, by comparing the data contained in the vehicles database, signals if the incorrect bottle is being used.

THERMAL PRINTER

The recharge station incorporates a thermal printer to provide detailed reports on all the operations performed.

TILT SENSOR SYSTEM FOR ACCURATE READINGS

The scales used for refrigerant measurement can be inaccurate when used on uneven surfaces.

Scales for weighing the refrigerant can be subject to a measurement error of approx. 20%. One of the most common causes of this inaccuracy can be the condition of the workshop floor where the station is used. Even slight variances can result in weighing errors which can mean that either too much or too little refrigerant is added to the vehicle’s system. TILT SENSOR SYSTEM analyses the scale’s horizontal positioning and alerts the operator that the readings may be inaccurate.

FAN PROTECTION SYSTEM

The new R1234yf refrigerant has been classified as being ‘highly flammable’ and this must be acknowledged by the operator. The KONFORT 700 series adopts a high efficiency redundant fan system to eliminate any possible refrigerant build up within the unit.

AUTOMATIC LEAK DETECTION MANAGEMENT

The KONFORT 700 series units automatically carry out a dual leak detection check. All safety related operations take place automatically in order to eliminate errors.

OPERATING SOFTWARE

TEXA’s operating software conforms to the strictest requirements of accuracy and precision.

The colour TFT matrix controls the progress of automated operations using images, graphics and technical diagrams. Any possible faults or messages are displayed via detailed error messages.

TEXA software manages the recovery and recharge processes, in order to guarantee precision that was previously unknown. In particular, the automatic procedures assist the operator with repairs on highly sophisticated systems.

TECHNICAL DATA

↑

MAIN FEATURES

Dual refrigerant management R134a & R1234yf
High visibility colour TFT display
Graphic interface
DATABASE/SERVICE management via SD card
Rotating gauge display (excluding Germany)

2x 12Kg tank
Load precision +/- 15gr
High efficiency refrigerant recovery (over 95%)
Dual stage vacuum pump

Hermetically sealed oil bottles
High precision automatic oil injection
Automatic bottle recognition
Automatic refrigerant precision check

Scale lock system
Automatic service management

Functionality:

DATABASE
PERSONALISED SERVICE
MY DATABASE

Multi-language software coverage
Service hose length compensation
Automatic service messages
Simplified unit service
Automatic non condensable management
Thermal printer

OPTIONAL

Vehicle flushing kit
VDC Kit
Climate control efficiency
refrigerant identifier
air conditioning system autodiagnostics.

WARNING

X

WARNING

The trademarks and logos of vehicle manufacturers in this document have been used exclusively for information purposes and are used to clarify the compatibility of TEXA products with the models of vehicles identified by the trademarks and logos. Because TEXA products and software are subject to continuous developments and updates, upon reading this document they may not be able to carry out the DIAGNOSTICS of all the models and electronic systems of each vehicle manufacturer mentioned within this document. References to the makes, models and electronic systems within this document must therefore be considered purely indicative and TEXA recommends to always check the list of the “Systems that can be diagnosed” of the product and/or software at TEXA authorized retailers before any purchase. The images and the vehicle outlines within this document have been included for the sole purpose of making it easier to identify the vehicle category (car, truck, bike, etc.) for which the TEXA product and/or software is intended. The data, descriptions and illustrations may change compared to those described in this document. TEXA S.p.A. reserves the right to make changes to its products without prior notice.

The BLUETOOTH brand is the property of Bluetooth SIG, Inc., U.S.A. with license to TEXA S.p.A.